|
Configure a Web Conferencing Edge Server |
Open Computer Management console and right Click the
Edge Service to go to "OCS 2007 Properties".
Click "Configure" under Internal
Interface option.
Select an IP Address to be used for internal
interface. This IP Address will be used to connect
with the OCS Pool\Server.
Select a certificate. The certificate should have the
FQDN in subject name which is configured on the OCS
Global properties under "Access Edge and Web Conferencing Edge
Servers". Certificate subject name should be
the internal FQDN of the Web Conf edge Server, if you have
only one Web Conf Edge Server. Certificate subject name
should be the internal load balancer virtual name, if
you have more than one Web Conf Edge Server.
Click "Configure" under Web Conferencing Edge
Server option.
Select an IP Address to be used for external
interface. This IP Address should be registered on
the Public DNS server against Web Conferencing Edge
public FQDN (External FQDN of the Web Conferencing Edge
Server). Or, this IP Address should be NATED with the
External IP Address of the Web Conferencing Edge Server.
Select a certificate. The certificate should have
the FQDN in subject name which is registered on the
public DNS. Certificate subject name should be the
external FQDN of the Web Conferencing Edge Server.
Note: If you are co-locating an
Access Edge Server with Web Conferencing Edge Server,
You can keep the same external name and external IP
Address. Microsoft recommends to host both Edge Services
on the same server.
Now go to "internal" tab.
Type the "Next hop network address". It should be
the OCS poolname or OCS Server name or OCS Director if
you have any!
Add Domain. It should be supported list of SIP
domains.
Add Servers. It should be the OCS Front End
Servers or a Director.
Make sure "Allow remote user access to your network"
and "Allow anonymous users to join meetings"
are checked on.
